Isıtmalı Hortumlar

Isıtmalı Hortumlar

Applications: Heat-loss free transport of: oil, grease, resin, tar, paint, water, carbon dioxide, plastic, moulding compounds etc.

Deployable pressure hose made of PTFE of DN 4 – 50 mm; pressure load depending on the nominal diameter up to 600 bar

Operating temperature H 100 100 °C – H 700 170 °C – H 200 200 °C – H 800 250 °C
Rated voltage 230 V AC/DC (other voltages up to 500 V)
Rated power Watt/metre, see type codes
Pressure hose type see Pressure hoses
Connection fitting steel / stainless steel, see Fittings
Heating heating conductor, structure according to DIN, moisture-proof with protective braid- ing
Thermal insulation heat stabilized, closed-pore
silicone foam up to 250°C
elastomer foam up to 170°C
Outer protective braiding polyamide, black, options possible
Hose end caps PA hard cap or elastomer cap
Temperature sensor Fe-CuNi type J, NiCr-Ni type K, PT100 and integral control system (HTI) possible
Connecting cable 1.5 m
Plug connection round connector
Production lengths from 0.3 to 50 m depending on DIN
Protection type up to IP54 (EN 60529), protection class I

In the majority of applications, it is a requirement to maintain the product temperature at a constant level, irrespective of the temperature fl uctuations in the system or the ambient temperature.

Why are heating hoses used:

  • so as to keep media fl owable for processing
  • to achieve their optimum characteristics for processing
  • to avoid the formation of condensate in gaseous media
  • to process economically
  • to ensure uniform quality
  • to enable production or measurement at any location
  • to connect moving parts and equipment

dn

0412.1050, 0413.0408, 0433.0488 A, 0433.0494 A, 0433.0501 A, 0413.0403, 0434.0076, 0433.0496 A